| Front page | | Contents | | Previous | | Next |
Analysis of chemical substances in balloons
8 Analysis for bioavailable heavy metals
The analysis results of the three balloon types selected for determination of release of heavy metals according to DS/EN 71-3, appear from Table 8.1.
Table 8.1 Bioavailable heavy metal according to DS/EN 71-3
Lab. mark. |
R32960-5 |
R32960-10 |
R32960-12 |
|
Sample mark. |
Balloon no. 10 |
Balloon no. 16 |
Balloon no. 20 |
|
Element |
|
|
|
Detection limit |
Sb mg/kg |
- |
- |
- |
6 |
As mg/kg |
- |
- |
- |
2,5 |
Ba mg/kg |
- |
- |
- |
25 |
Cd mg/kg |
- |
- |
- |
5 |
Cr mg/kg |
- |
- |
- |
2,5 |
Pb mg/kg |
- |
- |
- |
9 |
Hg mg/kg |
- |
- |
- |
2,5 |
Se mg/kg |
- |
- |
- |
50 |
Ni mg/kg |
- |
- |
- |
2 |
”-” less than the detection limit, which is 1/10 of the requirement value in the standard
Ni is not comprised by the standard but is included in the analysis.
As can be seen from Table 8.1, bio available heavy metals have not been detected in the analysed balloons, which means that no heavy metal-based accelerators (e.g. nickel dithiocarbamate salts) nor colorants have been used in the manufacture of the balloons.
| Front page | | Contents | | Previous | | Next | | Top |
Version 1.0 December 2007, © Danish Environmental Protection Agency
|