Modern Windships; Phase 2

Addresses:
Software

Ref. 1. Modern WindShips, Phase 1, Knud E Hansen A/S

Ref. 2. Modern WindShips, Computation of Sail Forces, Peter Heppel Associates, Internal report for phase 1 of the WindShip project

Ref. 3. CFD-beregning af 3 sejltyper, DMI (Danish Maritime Institute) report no. 98417, in Danish. Internal report for phase 2 of the WindShip project.

Ref. 4. WindShip, Wind-Tunnel Tests. Report No. 1: Single Rig Performance, DMI (Danish Maritime Institute) report no. 98266. Internal report for phase 2 of the WindShip project.

Ref. 5. WindShip, Wind-Tunnel Tests. Report No. 2: Ship Performance with Complete Rig, DMI (Danish Maritime Institute) report no. 98266. Internal report for phase 2 of the WindShip project.

Ref. 6. WindShip, Wind-Tunnel Tests. Report No. 3:Underwater Hull Configurations, DMI (Danish Maritime Institute) report no. 98266. Internal report for phase 2 of the WindShip project.

Ref. 7. WindShip, Towing Tank Tests. Report No. 4, Static Force Measurements on a Model of the WINDSHIP, DMI (Danish Maritime Institute) report no. 98267. Internal report for phase 2 of the WindShip project.

Ref. 8. Danmarks Meteorologiska Institut (DMI), Projekt Vindskib, Energeforbrug ved sejlads med vindskib på to handelsmønstre, 9/11 1999, version 1.0, Rasmus Feldberg. Internal report for phase 2 of the WindShip project, in Danish.

Ref. 9. WindShip phase 2 – Analysis of Profitability, Mærsk Broker, Research and Marketing 1999. Internal report for phase 2 of the WindShip project.

Ref. 10. Faltinsen, OM, Sea Loads on Ships and Offshore Structures, Cambridge University Press, 1999

Ref. 11. Lloyds Register,Provisional Rules for Sail-Assisted Ships

Ref. 12. Guidance Notes on Sailing Passenger Vessels, Rev.(B), 14.08.92

Ref. 13. Passenger Sailing Ships, Preliminary Guidance for the Testing, Marking, Survey and Certification Requirements for Masts and Standing Rigging

Ref. 14. Det Norske Veritas, DNV,Rules for Classification of Mobile Offshore Units

Ref. 15. Rules for Classification of High Speed and Light Craft

Ref. 16. Classification Notes No.30.5, Environmental Conditions and Environmental Loads

Ref. 17. Paper Series no.81/P084; Principles of Safe Design and Operation of Sail Driven Merchant Vessels

Ref. 18. Rules for Classification of Ships, Hull Structural Design Ships with Length 100 Meters and Above, Pt.3, Ch.1, July 1998

Ref. 19. Statens Byggeforskningsinsitut,SBI-Anvisning 158, Vindlast på bærande konstruktioner, 1989

Ref. 20. Dansk Standard,DS 472, last og sikkerhed for vindmøllekonstruktioner, 1:e udgave, maj 1992

Ref. 21. DS 456, konstruktioner af glasfiberarmeret umættet polyester, 1:e udgave, april 1985

Ref. 22. DS 409, Norm for sikkerhedsbestemmelser for konstruktioner, 2:nd ed. 1998-10-26

Ref. 23. DS 410, Norm for last på konstruktioner, 4:th ed, 1998-10-26

Ref. 24. DS 412, Norm for stålkonstruktioner, 3:rd ed. 1998-07-02

Ref. 25. Eurocode 1,Projekteringsgrundlag og last på bygværker, del 2-4: Last på bygværker, Vindlast

Ref. 26. EuroCode 3,Stålkonstruktioner, Del 3-2: Tårne, master og skorstene, Skortstene

Ref. 27. Dover Publications Inc.,Theory of Wing Sections, by Ira H. Abbott and Albert E. von Doenhoff

Ref. 28. McGraw-Hill Publishing Company,Introduction to Flight, 3:rd edition, by John D Anderson Jr., 1989

Ref. 29. Engineering Materials Advisory Services Ltd.,An Introduction to Sandwich Construction, by Dan Zenkert, 1995

Ref. 30. Chapman & Hall,Manufacturing of Polymer Composites, by B.T. Åström, 1997

Ref. 31. Adlard Coles Nautical,Principles of Yacht Design, by Lars Larsson & Rolf E Eliasson, 1:st ed., 1994

Addresses:

Ref. 32. LM GlasfiberA/S, Rolles Møllevej 1, DK-6640 Lunderskov, Denmark

Ref. 33. Mærsk Broker, Esplanaden 50, DK-1098 Copenhagen K, Denmark

Ref. 34. Dansk Maritimt Institut, Hjortekærsvej 99, DK-2800 Lyngby, Denmark

Ref. 35. Danmarks Meteorologiske Institut, Lyngbyvej 100, DK-2100 København Ø, Denmark

Ref. 36. SKF Denmark A/S, Sdr Ringvej 55, DK-2605 Brøndby, Denmark

Ref. 37. Denison Hydraulik Denmark A/S, Industrikrogen 2, DK-2635 Ishhøj, Denmark (Hägglunds representatives)

Ref. 38. AVN Hydraulik A/S, Dalager 1, DK-2605 Brøndby, Denmark (hydraulic cylinders)

Ref. 39. HEM International, Gemsevej 13, DK- 7800 Skive, Denmark (hydraulic cylinders)

Ref. 40. P.N. Erichsen A/S, Magnoliavej 10, DK-5250 Odense SV, Denmark (Thordon elastomeric bearings)

Ref. 41. Fiberline Composites A/S, Nr Bjertevej 88, DK-6000 Kolding, Denmark (pultruded conposite tubes)

Ref. 42. Exel Oy, Uutelantie 24 B, P.O. Box 29, FIN-52700 Mäntyharju, Finland k (pultruded conposite tubes)

Ref. 43. DIAB, Divinycell International ApS, Torvet 3, DK-3400 Hillerød, Denmark (core materials)

Ref. 44. Ulstein Tenfjord AS, N-6264 Tennfjord, Norge (rotary vane engines)

Ref. 45. Fyns Kran Udstyr A/S, DK-2665 Vallensbæk Strand, Egeskovvej 3, Denmark (representatives girths, ropes, lifting equipment etc.)

Ref. 46. Slingmax Inc. P.O. Box 2423, Aston PA 19014-0423 USA (manufacturers of Twin-Path slings)

Software

Ref. 47. NAPA version 98.2. NAPA Oy, PO Box 322, Munkkisaarenk. 2, FIN-00151, Helsinki, Finland

Ref. 48. ANSYS version 5.5.1, ANSYS Inc., Southpointe, 275 Tech. Drive, Canonsburg, PA 15317, USA

Ref. 49. MATLAB version 5.3,The MathWorks Inc. 24 Prime Park Way, Natick, MA 01760-1500, USA