Miljønyt, 81 – Genanvendelse i LCA - systemudvidelse

Genanvendelse i LCA - systemudvidelse

Referencer

APME (2002). Plastics. An analysis of plastics consumption and recovery in Western Europe 2000. APME, Brussels. Kan downloades fra www.plasticseurope.org.

APME (2003). Plastics. An analysis of plastics consumption and recovery in Europe 2001 & 2002. APME, Brussels. Kan downloades fra www.plasticseurope.org.

APME/VKE (1997). Feedstock recycling of electrical and electronic plastics waste (depolymerisation and conversion into syncrude). APME, Brussels.

Ayres RU, Ayres LW, Råde I (2002). The life cycle of copper, its co-products and its by-products. Iied and WBCSD. http://www.iied.org/mmsd/mmsd_pdfs/ayres_lca_main.pdf

Blomberg J. (2000); The West European Market for Secondary Aluminium: Supply and Demand Models. Licentiate Thesis 2000:06, Dept. Of Business Administration and Social Science, Devision of Economics, Luleå University of Technology, Luleå, Sweden.

Boustead I (2001). Who gets the credit? APME, Brussels. Kan downloades fra www.plasticseurope.org.

Busch NJ, Hirsbak S, Niemann AL (2004). Affaldshåndtering af udvalgte engangsemballager. Miljøprojekt Nr. 896, 2004. Miljøstyrelsen.

BUWAL (1996). Ùkoinventare für Verpackungen. Schriftenreihe Umwelt Nr. 250/I og II. Bundesamt für Umwelt, Wald und Landschaft, Bern.

CEPI (2003); Recycling rate: a steady increase in 2002 towards the 2005 target. Special Recycling 2002 Statistics, Confederation of European Paper Industries, Brussels, Belgium.

CEPI, ERPA, & FEFCO (2004); The European Declaration on Paper recovery. Annual Report 2003. Confederation of European Paper Industries (CEPI), European recovered Paper Association (ERPA), & FEFCO. Brussels, Belgium.

Dall O, Christensen CL, Hansen E, Christensen EH (2003). Ressourcebesparelser ved affaldsbehandlingen I Danmark. Miljøprojekt Nr. 804, 2003. Miljøstyrelsen.

DESA (1999). Trends in production and comsumption: Selected minerals. United Nations, Department of Economic and Social Affairs.

EEA (2004); Waste and material flows 2004. Current situation for Europe, Caucasus and Central Asia. European Environment Agency (EEA), Copenhagen, Denmark.

EAA (2000); Environmental Profile Report for the European Aluminium Industry. European Aluminium Association, Brussels, Belgium.

EAA (2001); Aluminium Industry in Europe – Key Statistics for 2000. European Aluminium Association (EAA), Press Information, Brussels, Belgium.

Ekvall, T (1999); System Expansion and Allocation in Life Cycle Assessment. PhD thesis. Department of Technical Environmental Planning, Chalmers University of Technology, Gùteborg, Sweden.

Ekvall, T., Ryberg, A., & Ringstrùm, E. (2001); Brytpunkter vid miljùmässig jämfùrelse mellan materialåtervinning och energiutvinning av använda pappersfùrpackningar, CIT Ekologik, Chalmers Industriteknik, Gùteborg, Sweden

Ekvall T (2000). A market-based approach to allocation at open-loop recycling. Resources, Conservation and Recycling 29(2000) 91-109.

Ekvall T, Weidema B (2004). System boundaries and input data in consequential life cycle inventory analysis. Int. J. LCA. 9(2004) 161-171.

Farrell F. (2001); The impact of best available techniques (BAT) on the competitiveness of the European non-ferrous metals industry. Institute for Prospective Technological Studies (Seville), Joint Research Centre, European Commission.

Frees N (2002). Miljømæssige fordele og ulemper ved genvinding af plast. Miljøprojekt Nr. 657, 2002. Miljøstyrelsen.

Frees N, Schmidt A, Grinderslev M, Dall O (2004). Opdatering, fejlretning og oversættelse af UMIP databasen. 2. opdatering. Arbejdsrapport fra Miljøstyrelsen Nr. 6, 2004.

Frees, N; Hansen, M.S.; Ottosen, L.M; Tønning, K.; Wenzel, H (2005); Miljømæssige forhold ved genanvendelse af papir og pap – opdatering af vidensgrundlaget. Miljøprojekt Nr. 1057, 2005. Miljøstyrelsen.

Hansen E (2004). Status for LCA i Danmark 2003. Introduktion til det danske LCA metode- og konsensusprojekt. Udkast til Miljøstyrelsen marts 2004.

Hedenberg, Ù., Backlund Jacobson, B., Pajula, T., Person, L., & Wessman, H. (1997); Use of Agro Fiber for Paper Production from an Environmental Point of View. NORDPAP DP2/54, SCAN Forskrapport 682. Skogsindustrins Tekniska Forskningsinstitut, Stockholm, Sweden.

Heyde M, Kremer M (1999). Recycling and recovery of plastics from packagings in domestic waste. LCA-type analysis of different strategies. LCA Documents Vol. 5, 1999. ecomed publishers.

IAI (2003); Life Cycle Assessment of Aluminium: Inventory Data for the Worldwide Primary Aluminium Industry. Appendix B, table 3a. The International Aluminium Institute, London, United Kingdom.

ICSG (2004). International Copper Study Group. ICSG presse release. Copper: Preliminary data for October 2003. http://www.icsg.org/

ISO 14041. Livscyklusvurderinger – en kommenteret oversættelse af ISO 14040 til 14043. DS-Håndbog 126:2001. Dansk Standard.

ISWA (2004); ISWA National Waste Management Profile for Germany. Section 3 Waste Management. Original data source: Federal Statistical Office, Germany. http://www.iswa.org/uploadfiles/Final_Waste_Info_27_July.htm#TreatGE. International Solid Waste Association (ISWA), Kùpenhamn, Danmark.

Jacobsen J (2002). Emballageforsyningsmængden 2000. Miljøprojekt Nr. 696, 2002. Miljøstyrelsen.

Jolly JL (2001). The U.S. Copper-base Scrap Industry and Its By-products. An overview. Copper Development Association Inc., New York, 2001.

Miljøstyrelsen (1999); Aluminium – massestrømsanalysen og vurdering af muligheder for at minimere tab. Miljø- og Energiministeriet Miljøstyrelsen, Report 484, København, Danmark.

Miljøstyrelsen (1999); Affald 21 - Regeringens affaldsplan 1998 – 2004. Miljø- og Energiministeriet Miljøstyrelsen, København, Danmark.

Miljøstyrelsen (2003); Statistik for returpapir og –pap 2001. Miljø- og Energiministeriet Miljøstyrelsen, Project No. 830, København, Danmark.

Mølgaard, C. (1995). Environmental analysis of disposal of plastics waste. Ph.D. thesis PI95-08-A. DTU. Lyngby.

Nielsen PH, Hauschild M (1998); Product specific emissions from municipal solid waste landfills. Part 1: Landfill model. Int. J. LCA 3(3): 158-168.

Nielsen PH, Exner S, Jørgensen A-M, Hauschild M (1998); Product specific emissions from municipal solid waste landfills. Part II: Presentation and verification of the computer tool LCA_LAND. Int. J. LCA 3(4): 225-236.

NordPap (1997); Use of agro fiber for paper production from an environmental point of view. Hedenberg, H., Backlund Jacobson, B., Pajula, T., Persson, L. & Wessman, H. NORDPAP DP2/54, SCAN Forskrapport 682, Oktober 1997.

Ottosen LM, Tønning K (2001). Indsamling af plastflasker og –dunke fra husholdninger. Miljøprojekt Nr. 637. Miljøstyrelsen.

Ottosen LM (2002). Statistik for plastemballage 2000. Miljøprojekt Nr. 693, 2002. Miljøstyrelsen

Palmer K, Sigman H, Walls M (1997). The Cost of Reducing Municipal Solid Waste. J Environ Econokm Manage 33, 128 – 150.

Reforsk (1993); Milujùmässiga skillnader mellan återvinning/återanvändning och fùrbränning/deponering. Stiftelsen Reforsk, FoU nr 79, Sverige

Ryberg A. & Eriksson E. (1999); Sustainable Development within the Aluminium Sector. Swedish Environmental Protection Agency, Report 5040. CIT Ekologik, Chalmers Industriteknik, Gùteborg, Sweden.

Seppälä J, Koskela S, Melanen M, Palperi M (2002). The Finnish metal industry and the environment. Resources, Conservation and Recycling 35(2002) 61-76.

Stakeholder Dialogues (2003). http://www.electronicsrecycling.org/Stakeholder/
Meetings/May2003Meeting/May2003Summary.asp

Strùmberg K. (2000); Värdering av aluminium i återvinningssystem –Metodutveckling –Modellering –Programutveckling. Avdelningen fùr experimentell fysik, Chalmers Tekniska Hùgskola, Gùteborgs Universitet, Gùteborg, Sweden.

Suslow V. Y. (1986); Estimating monopoly behavior with competive recycling: An application to Alcoa. Rand J. Econom. 3, 398-403.

TÜV Rheinland (1999). Recycling and recovery of plastics from packaging in domestic waste. LCA-type analysis of different strategies. Summary report. TÜV Verlag GmbH, Køln.

USEPA (2002a); Municipal Solid Waste in The United States: 2000 Facts and Figures. United States Environmental Protection Agency (USEPA), Washington, USA.

USEPA (2002b); Solid Waste Management and Greenhouse Gases. A Life Cycle Assessment of Emissions and Sinks.2^nd Edition, EPA530-R-02-006. United States Environmental Protection Agency (USEPA), Washington, USA.

Weidema B (2003). Market information in life cycle assessment. Environmental project No. 863, 2003. Miljøstyrelsen.