Technical Documentation of PestSurf, a Model describing Fate and Transport of Pesticides in Surface Water for Danish Conditions

Appendix C

1 Examples of *.sim11, *.ad11, *.PE11 pesticide_diffusion.txt files used for MIKE 11

Example of an *.sim11 file used for the river or pond simulation by MIKE11:

// Created : 2002-06-10 16:37:38
// DLL id : C:\WINNT\System32\pfs2000.dll
// PFS version : Jun 9 2002 22:24:08

[Run11]
   format_version = 103
   [Models]
      hd = false, false
      ad = true
      st = false
      wq = true, 3, 0
      rr = false
      ff = false
      SimMode = 0
      QSS = 0
   EndSect // Models

   [Input]
      nwk = 'odder8.nwk11'
      xs = 'Odder5.xns11'
      bnd = 'bentazone.bnd11'
      rr = ''
      hd = 'Odder5.HD11'
      ad = 'bentazone.AD11'
      wq = 'Bentazone.pe11'
      st = ''
      ff = ''
      rhd = 'ODDER5.RES11'
      rrr = ''
   EndSect // Input

   [Simulation]
      [Simulation_Period]
         start = 1998, 1, 1, 12, 0, 0
         end = 1998, 1, 3, 12, 0, 0
         timestep = 0.5
         timestepunit = 2
         ST_timestep_multiplier = 1
         RR_timestep_multiplier = 1

   EndSect // Simulation_Period

   [Initial_Conditions]
      hd = 2, 'ODDERHOT5.RES11', false, 1993, 1, 3, 7, 0, 0
      ad = 0, '', false, 1990, 1, 1, 12, 0, 0
      st = 0, '', false, 1990, 1, 1, 12, 0, 0
      rr = 0, '', false, 1990, 1, 1, 12, 0, 0
   EndSect // Initial_Conditions

EndSect // Simulation

[Results]
   hd = 'ODDER5.RES11', 288
   ad = 'Bentazone.res11', 30
   st = '', 1
   rr = '', 1
EndSect // Results

EndSect // Run11

Example of an *.ad11 file used for the river or pond simulation by MIKE11.

// Created : 2002-09-6 10:35:58
// DLL id : C:\WINNT\System32\pfs2000.dll
// PFS version : Aug 14 2002 21:58:52

[MIKE0_AD]
   [Global_Variables]
      LastSelected = 3
         G_Coli = false
      G_Phos = false
      LastLevel1 = 1
      WQInter = 0
      G_disp_factor = 15
      G_exponent = 0
      G_min_disp_coef = 0
      G_max_disp_coef = 100
      G_fact1 = 1
      G_fact2 = 1
      G_beta = 0.65
      G_kin_visc = 1
      G_porosity = 0.35
      G_rel_dens = 2.65
      G_thetac = 0.056
      model_type = 1
      G_Ice_latitude = 51
      G_Ice_dens_water = 1000
      G_Ice_spec_heat_water = 4200
      G_Ice_latent_heat_ice = 330000
      G_Ice_heat_flux = 12.5
      G_Ice_dens_ice = 917
      G_Ice_const_cross_A = 0
      G_Ice_const_activate = 0
      G_Ice_air_temp = 10
      G_Ice_cloudness = 0
      G_Ice_cloud_dens = 0
      G_Ice_wind_speed = 0
      G_Ice_visibility = 25
      G_Ice_precipitation = 0
      G_Ice_thickness = 0
      G_Ice_width = 0
      G_Ice_quality = 0
      G_Add_ConvG = false
      G_Add_ConvGA = false
      G_Add_DispersG = false
      G_Add_DispersGA = false
      G_Add_MassBG = false
      G_Add_MassBGA = false
      G_Add_MassBT = false
      G_Add_MassBTA = false
      G_Add_MassG = false
      G_Add_MassGA = false
      G_Add_MassT = false
      G_Add_MassTA = false
      G_Add_MBranchT = false
      G_Add_MBranchTA = false
      G_Add_OrderG = false
      G_Add_OrderGA = false
      G_Add_OrderT = false
      G_Add_OrderTA = false
      G_Add_TransG = false
      G_Add_TransGA = false
      G_M12Comp = false
      [MIKE12_Additional]
         Mass = 0, 0, 0, 0, 0, 0, 0, 0
         Mass_balance = 0, 0, 0, 0, 0, 0, 0, 0
         Mass_branch = 0, 0, 0, 0
         Decay_branch = 0, 0, 0, 0, 0, 0, 0, 0
         Entrain_branch = 0, 0, 0, 0, 0, 0, 0, 0
         Transport_total = 0, 0, 0, 0
         Dispersive_trans = 0, 0, 0, 0
         Convective_trans = 0, 0, 0, 0
      EndSect // MIKE12_Additional

      [MIKE12_Dispersion]
         G_disp_factor = 0, 0
         G_exponent = 0, 0
         G_min_disp_coef = 0, 0
         G_max_disp_coef = 100, 100
      EndSect // MIKE12_Dispersion

   EndSect // Global_Variables

   [InitList]
      DATA = 1, 0, true, '', 0
      DATA = 2, 0, true, '', 0
      DATA = 3, 0, true, '', 0
      DATA = 4, 0, true, '', 0
      DATA = 5, 0, true, '', 0
      DATA = 6, 0, true, '', 0
      DATA = 7, 0.02, true, '', 0
   EndSect // InitList

   [InitStratified]
   EndSect // InitStratified

   [NonCohesList]
   EndSect // NonCohesList

   [DecayList]
      DATA = 1, 0, true, '', 0
      DATA = 2, 0, true, '', 0
      DATA = 3, 0, true, '', 0
      DATA = 4, 0, true, '', 0
      DATA = 5, 0, true, '', 0
   EndSect // DecayList

   [DispersList]
    EndSect // DispersList

   [IceDataList]
    EndSect // IceDataList

   [Cohesive_ST]
    EndSect // Cohesive_ST

   [CompList]
      DATA = 1, 'BENTAZON', 2, 0
         DATA = 2, 'CS', 2, 0
         DATA = 3, 'SW', 2, 0
         DATA = 4, 'SS', 2, 0
         DATA = 5, 'CP', 2, 0
         DATA = 6, 'CM', 2, 0
      DATA = 7, 'Z', 6, 0
   EndSect // CompList

   [BoundList]
      DATA = 'ODDERBAEK', 4168, 0, 0
      DATA = 'Gislum_enge_afloeb', 0, 0, 0
      DATA = 'Tilloeb', 0, 0, 0
      DATA = 'Odderbaek', 0, 0, 0
   EndSect // BoundList

   [LayerList]
    EndSect // LayerList

   [M12BoundList]
    EndSect // M12BoundList

   [M12DispersList]
    EndSect // M12DispersList

EndSect // MIKE0_AD

Example of an *.pe11 file used for the river or pond simulation by MIKE11.

// Created : 2001-01-9 12:22:57
// DLL id : C:\WINNT\System32\pfs2000.dll
// PFS version : Nov 10 2000 01:14:49

[MIKE_PE1]
   [Global_Variables]
      [General_Parameters]
      include_metabolite = false
      include_sediment_diffusion = false
      Latitude = 57
      boundary_thickness = 1
      resuspension_rate =0
      density_dry_sediment = 2.0e6
      Porosity = 0.75
      Settling_Velocity= 0.0
      Macrophyte_biomass = 2.5
      alfa = 2.5
      production_of_suspended_matter = 0.0
   EndSect // General_Parameters

   [Pesticide_Parameters]
      Molecular_Weight = 300
      Macrophyte_Water_Coefficient = 3.97E-05
      Desorption_Sediment = 0
      Desorption_Water= 1.07E+01
      Desorption_Macrophyte= 7.29E+00
      Hydrolysis_Constant_Acid=0.0
      Hydrolysis_Constant_Alkaline=0.0
      Hydrolysis_Constant_Neutral=0.0
      pKa_backtransformed=0.000524807
      Bio_degradation_Adsorbed=0.0
      Bio_degradation_Sediment=0.0
      Bio_degradation_Macrophyte=0.0
      Bio_degradation_Dissolved=0
      Gas_exchange_Coefficient=45
      Transfer_velocity=0.029
      Kd_Sediment=3.25e-6
      Gas_Diffusion=1.8e-6
      Henrys_Constant=2.91e-8
      Kd_Water=3.25E-06
      Diffusion_coefficient = 1.8e-6
      Quantum_yield = 1.6897E-05
      Diffuse_Light_Scattering =1.6
      Ratio_Biodegradation = 0.0
      Ratio_Hydrolysis = 0.0
      Ratio_Photolysis = 0.0
      Freundlich_Coef_Sediment = 1.0
      Freundlich_Coef_Macrophyte = 1.0
   EndSect // Pesticide_Parameters

   [Metabolite_Parameters]

      Molecular_Weight = 303.3
      Hydrolysis_Constant_Acid=1.0
      Hydrolysis_Constant_Alkaline=2.0
      Hydrolysis_Constant_Neutral=3.0
      pKa_backtransformed=4
      Bio_degradation_Adsorbed=5.0
      Bio_degradation_Sediment=6.0
      Bio_degradation_Macrophyte=7.0
      Bio_degradation_Dissolved=8.0
   EndSect // Metabolite_Parameters

   [Forcing]
      Temperature = 18.5
      Hydrogen_Concentration=3.16e-8
      Macrophyte_Growth_function=1.0
      Photolysis_rate=-250
   EndSect // Forcing
EndSect // Global_Variables

Example of an pesticide_diffusion.txt file used for the pond simulation by MIKE11.

 



Version 1.0 Maj 2004, © Danish Environmental Protection Agency